VintageBodyRestoration

Each vintage body restoration starts with an initial teardown of the vehicle where we disassemble and mark & package all of the parts and hardware to be refinished or replaced as needed. A list of new parts needed is then compiled as the parts to be reconditioned are media blasted to remove all the original coatings from the metal. Once the old body panels have been stripped bare, any dings or dents are repaired and spot primed before the panels are reinstalled with rebuilt hinges and aligned for proper fitment. Afterward, the entire vehicle gets primed and block sanded for a smooth base before being seam-sealed. The vehicle is then primed again, block sanded again and recieves it's final prep for paint. The vehicle than makes it's final trip into the spraybooth where it will be sealed, have the basecoat applied and finally get clearcoated. The vehicle then begins the reassembly process with all of the major components reinstalled and aligned. Once the body panels are reinstalled the paint is cut & buffed to a mirror finish. The final trim pieces are reinstalled and the vehicle recieves a complete detail before being delivered to the customer.

Every Vintage Body Restoration includes the teardown & reassembly; complete media blasting; body work (up to 40hrs); rebuilt hinges; rebuilt & adjusted door & window regualtors; rust inhibiting coating; factory correct paint; color sand & polish; a complete vehicle detail.